Programming Handset (Transmittter) to Receiver

1. Glidermatic GRD™ and Rollamatic GRD II™ - (Roller Doors)
   This explains how to programme a handset to receiver for roller door operators (TM305C transmitter from year 2000 onwards)
2. GTS 2000™ Tilt and Sectional Door Automatic Operator - (Panel-glides)
   This explains how to programming a handset to the receiver for a Panel-Glide door operator (TM305C transmitter from year 2000 onwards)
3. Stand Alone Receiver (Old operator / other make operators)
   This refers to programming a Gliderol handset to a stand-alone receiver for ANY make door or operator
4. GTX U3
   Explains the programming of a GTX U3 handset to the receiver
5. GTX U1
   This refers to the programming of a GTX U1 handset to the receiver
6. GTS Tilt and Sectional Door Automatic Operator
   This refers to programming a handset (TM305C) to the receiver for an old style GTS operator

Setting Door Travel Limits

1. Door Travel Adjustment - Roller Doors
   This explains how to adjust both top and bottom travel limits for a roller door with a Glidermatic operator
2. GTS 2000™ Tilt and Sectional Door Automatic Operator - NEW (from year 2000 onwards)
   This explains how to adjust both top and bottom travel limits for a Panel-Glide Sectional Overhead door operated by a GTS 2000 automatic operator (from year 2000 onwards)
3. GTS Tilt and Sectional Door Automatic Operator - OLD (Pre-year 2000)
   This refers to setting or adjusting top and bottom limits of a Panel-Glide Sectional Overhead door fitted with an old GTS operator

Accessory Options

1. External Single Push Button Wiring - GRD 2000™ - (Roller Doors)
   This diagram refers to controlling the opening and closing of a roller door by using a single bell-type push button - (from year 2000 onwards)
2. External Pendant Switch 3 Button Wiring - GRD 2000™
   This refers to the wiring of an External Pendant 3 button switch which controls the opening, closing and stopping of a roller door - (from year 2000 onwards)
3. External Card Swipe Wiring - GRD 2000™
   This diagram refers to the wiring up of an External Card Swipe used to control the opening and closing of a roller door (from year 2000 onwards) 
4. Photo Sensor Wiring Diagram - GRD 2000™
   The Photo Sensor wiring diagram illustrates the connecting of the photo electric sensor to the Universal Control Box for automatic safety reversing - (from year 2000 onwards)
   
5. Handset Button Setting - GRD 2000™
   This explains how to configure the different buttons on the handset to operate up to three different doors / gates
6. External Single Push Button and Photo Sensor wiring - GTS 2000 - (Panel-Glides) 
   This refers to Panel-Glide wiring diagrams for single push button and safety photo sensor wiring 
7. External Manual Key Release or Dual Override Installation
   This refers to the Installation of an external manual key release to open the door in the event of power failure
8. External Battery Backup Connection Diagram
   This refers to wiring an external battery backup system for a roller-door, panel-glide or gate operator